on this occasion I want to share about any damage to the computer and its handling. Go straight to the scene, don’t let it be too late. let’s checkibroott..

The following are some of the damage to computer components and how to prevent damage to computer components.

Power Supply :
The computer does not turn on at all, check all power cables whether they are connected properly or not, check the switch button in front of the cpu is on or not, check the power cable is good or not, if symptoms like this occur, it means the power supply is damaged. and must be replaced with a new one.

VGA and Monitor
The computer turns on but there is no display on the monitor, a beep sounds when it is turned on. Possible damage to the VGA or it could be on the monitor, try testing with a VGA or other monitor that still works.

RAM
The power supply is on, can’t get into windows and there’s no beep. try to clean the ram slot using a brush and clean the RAM by erasing. if it still doesn’t work, the RAM must be replaced with a new one.

Motherboard / Mainboard
After turning on, there is no display on the monitor, the indicator light (led) on the front panel is on, the monitor indicator light (led) is flashing, the power supply fan and processor fan are spinning, there is no beep sound on the speaker.

Hard disk
The computer is on, can’t enter Windows and the hard drive is not detected, try to unplug the hard drive and plug it back in.

the above statement does not rule out other damages. so if there is damage, try to replace one by one the damaged computer components with computer components that are still good. that way you will know where the core of the damage is.

maybe that’s all I can share. I hope that this can have a benefit for readers.

Leave a Reply

Your email address will not be published.